Appendix B: Security Settings on Wireless Clients/RADIUS Server
Configuring Static WEP Security On A Client
To configure the client to not use any security, bring up the client Network Properties dialog,
and configure the following settings.
Table B.1 Association Settings
Network Authentication
Data Encryption
B.5
Configuring Static WEP Security On A Client
Static Wired Equivalent Privacy (WEP) encrypts data moving across a wireless network
based on a static (non-changing) key. The encryption algorithm is a "stream" cipher called
RC4. The access point uses a key to transmit data to the client stations. Each client must use
that same key to decrypt data it receives from the access point. Different clients can use dif-
ferent keys to transmit data to the access point. (Or they can all use the same key, but this is
less secure because it means one station can decrypt the data being sent by another.)
B-12
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Set Network Authentication to Open
Set Data Encryption to Disabled
Open
Disabled