Table of Contents
Advertisement
Important: The maintenance and monitoring tasks described here all pertain to viewing
11.1
Interfaces
To monitor wired LAN and wireless LAN (WLAN) settings, navigate to Status > Interfaces
on the access point you want to monitor.
Note: On a two-radio access point, current wireless settings for both Radio One and Radio
Two are shown. On a one-radio access point, settings are shown for one radio. The
Interfaces page for a two-radio AP is shown in the following figure.
Figure 11.1 Network Interfaces Page
This page displays the current settings of the 9160 G2 Wireless Gateway. It displays the
Ethernet (Wired) Settings and the Wireless Settings.
and modifying settings on specific access points; not on a cluster configura-
tion that is automatically shared by multiple access points. Therefore, it is
important to ensure that you are accessing the Administration Web pages for
the particular access point you want to configure. For information on this,
see "Configuration Information For A Specific AP And Managing Stan-
dalone APs" on page 61.
Chapter 11: Maintenance And Monitoring
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Interfaces
121
Advertisement
Table of Contents
