Table of Contents
Advertisement
Protocols are the methods by which mobile computers communicate with host computers
over various media such as Ethernet and radio-link connections. The 9160 G2 supports the
TCP/IP protocol. The supported emulations are:
•
9010/ TCP/IP (See below for details).
•
3274 Emulation (See pages 258 to 273 for Configuration Parameters).
•
5250 Emulation (See pages 274 to 288 for Configuration Parameters).
•
ANSI Emulation (See pages 289 to 299 for Configuration Parameters).
When the 9160 G2 Wireless Gateway acts as a base station, it uses the 9010 emulation (a
proprietary asynchronous protocol developed by Psion Teklogix) to communicate with a
9500 Communications Server or a host using a Psion Teklogix Software Development Kit
(SDK). For information on configuring the 9160 G2 as a base station and 9010 emulation,
please refer to Chapter 22: "The 9160 G2 As Base Station".
When the 9160 G2 Wireless Gateway acts as a mini-controller, it uses the 3274 and 5250
emulation protocols to communicate with IBM hosts, or the ANSI emulation protocol to
communicate with ANSI mobile computers.
To Restore Default Configuration
At the bottom of the Host menu page, you can click on Default to re-load the default config-
uration values for this host.
Updating Settings
At any point during the host configuration process, you may Update the settings or Cancel
the process by clicking on the respective button on the bottom of the page.
Chapter 23: Mini-Controller Configuration
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Hosts Menu
257
Advertisement
Table of Contents
