Table of Contents
Advertisement
"How to Configure a Certificate Server" at
http://support.microsoft.com/default.aspx?scid=kb;en-us;318710#3
To use this type of security, you must do the following:
1. Add the 9160 G2 Wireless Gateway to the list of RADIUS server clients. (See "Con-
figuring An External RADIUS Server To Recognize The 9160 G2" on page B-31.)
2. Configure the 9160 G2 Wireless Gateway to use your RADIUS server (by providing
the RADIUS server IP address as part of the "IEEE 802.1x" security mode settings).
3. Configure wireless clients to use IEEE 802.1x security and "Smart Card or other
Certificate" as described in this section.
4. Obtain a certificate for this client as described in "Obtaining A TLS-EAP Certificate
For A Client" on page B-35.
If you configured the 9160 G2 Wireless Gateway to use IEEE 802.1x security mode with an
external RADIUS server . . .
. . . then configure IEEE 802.1x security with certificate authentication on each client as
follows:
Appendix B: Security Settings on Wireless Clients/RADIUS Server
IEEE 802.1x Client Using EAP/TLS Certificate
Psion Teklogix 9160 G2 Wireless Gateway User Manual
.
B-19
Advertisement
Table of Contents
