Table of Contents
Advertisement
Band Radio Configuration Settings page. See Figure 22.4 on page 225 for the list of associ-
ated channels and frequencies.
22.3.4 Connectivity Options: RRM Mode
When you enter the Connectivity Options sub-menu for a slave 9160 G2 set in RRM operat-
ing mode, the 9160 G2 displays the RRM parameters.
IP Port
This parameter allows you to enter the listening port number of the 9160 G2 operating as an
RRM slave. The port number can range from 1024 to 32767.
Important: The port number entered here must match the port number entered for this
22.4
Connectivity Menus
The 9160 G2 Wireless Gateway can operate as a base station or remote radio module
(RRM), facilitating the communications between mobile computers and wireless base sta-
tions and a network controller (Psion Teklogix 9500 Communications Server or 9160 G2
Wireless Gateway), using a range of host platforms. Alternatively, the network controller
can be a host running a Psion Teklogix SDK (handler).
The 9160 G2 can also act as a slave base station to another 9160 G2 on the network.
9160 G2 in the network controller's RRM configuration.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 22: The 9160 G2 As Base Station
Connectivity Options: RRM Mode
231
Advertisement
Table of Contents
