Psion Teklogix 9160 G2 User Manual page 141

Table 10.9 WPA Enterprise Security Settings
Field Description
You can choose whether to use the built-in authentication server provided with the 9160 G2 Wireless Gateway,
Use internal
or you can use an external radius server.
radius server
• To use the authentication server provided with the 9160 G2 Wireless Gateway, ensure the check-
box beside the Use internal radius server field is selected. If this option is selected, you do not have
to provide the Radius IP and Radius Key; they are automatically provided. If the option for the inter-
nal RADIUS server is enabled, configure user accounts on the AP via the Cluster > User Manage-
ment tab. For more information, see Chapter 7: "Managing User Accounts".
• To use an external authentication server, ensue the checkbox beside the Use internal radius
server field is deselected. If you deselect this checkbox you must supply a Radius IP and Radius
Key of the server you want to use.
Note: The RADIUS server is identified by its IP address and UDP port numbers for the different
Enter the Radius IP in the textbox. The Radius IP is the IP address of the RADIUS server.
Radius IP
(The 9160 G2 Wireless Gateway internal authentication server is
For information on setting up user accounts, see Chapter 7: "Managing User Accounts".
Radius Key Enter the Radius Key in the textbox.
The Radius Key is the shared secret key for the RADIUS server. The text you enter will be displayed as " * "
characters to prevent others from seeing the RADIUS key as you type.
(The 9160 G2 Wireless Gateway internal authentication server key is
This value is never sent over the network.
Click Enable RADIUS Accounting if you want to enforce authentication for WPA client stations with user
Enable
names and passwords for each station. See also Chapter 7: "Managing User Accounts".
RADIUS
Accounting
services it provides. On the current release of the 9160 G2 Wireless Gateway, the RADIUS
server User Datagram Protocol (UDP) ports used by the access point are not configurable.
(The 9160 G2 Wireless Gateway is hard-coded to use RADIUS server UDP port 1812 for
authentication and port 1813 for accounting.)
If you have an external RADIUS server on your network, we recommend using it rather than the using
the embedded RADIUS server on the AP. An external RADIUS server will provide better security than
the local authentication server.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 10: Configuring Security
Security Modes
127.0.0.1
.)
secret
.)
117