Table of Contents
Advertisement
Chapter 22: The 9160 G2 As Base Station
Hosts Menu
The Radio Link Features screen provides several parameters for each Automatic Terminal
Number group: a range specified by a lower terminal number and an upper terminal number,
and a comment. The comment is a string of ASCII text that can be used to describe the
group.
Notes: When enabling Automatic Terminal Number:
1. Direct TCP Connections for TekTerm must be disabled (see page 244).
2. The Auto Session parameter in the mobile computer must be enabled in order
for the terminal session number to be automatically assigned.
22.4.4 Hosts Menu
When the 9160 G2 acts as a base station, it must communicate with a "host"—a 9500 Com-
munications Server, or a host computer using a Psion Teklogix Software Development Kit
(SDK). Therefore each master network controller, SDK host, or master base station that
communicates with the 9160 G2 must be configured as a host. The Hosts page of the Con-
nectivity options shows the description of the host chosen from the drop-down list (see
Figure 22.9 on page 247).
The menu page in this option shows the host names present on the system. Up to six hosts
can be supported. Once a host has been configured, selecting the Host Number for that host
lists the parameters that can be modified or deleted.
246
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
