Table of Contents
Advertisement
Chapter 23: Mini-Controller Configuration
ANSI Emulation
23.4.3.2 Telnet Protocol Options
Terminal Type
This parameter specifies the type of mobile computer to be emulated by the 9160 G2. The
characters entered in the textbox can be any ASCII string acceptable to the host, with a
maximum of 32 characters. The default value is VT100.
Host Port
This parameter specifies the value for the host port for the selected ANSI host connection.
The default value is 23.
Maximum Sessions per Terminal
This parameter contains the maximum number of telnet sessions which are allowed to origi-
nate from each mobile computer. The range is 1 to 127, with a default value of 4.
Close Host Sessions on Terminal Reset
When this parameter is enabled, and a terminal reset message is received, the Host session
for that terminal number will be closed. The default value is disabled.
First Local Terminal Port
This parameter specifies the port number from which the 9160 G2 attempts a telnet connec-
tion for the first mobile computer. The default value is 10000. Additional telnet sessions are
assigned higher port numbers.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
293
Advertisement
Table of Contents
