Table of Contents
Advertisement
Important:
The maintenance and monitoring tasks described here all pertain
to viewing and modifying settings on specific access points; not on
a cluster configuration that is automatically shared by multiple
access points. Therefore, it is important to ensure that you are
accessing the Administration Web pages for the particular access
point you want to configure. For information on this, see "Navi-
gating To Configuration Information For A Specific AP And
Managing Standalone APs" on page 62.
11.1 Interfaces
To monitor wired LAN and wireless LAN (WLAN) settings, navigate to Status >
Interfaces on the access point you want to monitor.
Note: On a two-radio access point, current wireless settings for both Radio One
and Radio Two are shown. On a one-radio access point, settings are
shown for one radio. The Interfaces page for a two-radio AP is shown in
the following figure.
This page displays the current settings of the 9160 G2 Wireless Gateway. It displays
the Ethernet (Wired) Settings and the Wireless Settings.
Chapter 11: Maintenance And Monitoring
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Interfaces
119
Advertisement
Table of Contents
