Table of Contents
Advertisement
Chapter 23: Mini-Controller Configuration
3274 Emulation
First Local Terminal Port
This parameter contains the local port number from which the first mobile computer will
connect on outbound telnet sessions. The default value is 10000.
Local IP Address to Bind
This parameter contains the IP address of the network adaptor in the 9160 G2 from which
the first mobile computer will connect on outbound telnet sessions.
First Terminal Listen Port
This parameter specifies the first port number at which the 9160 G2 will listen for telnet
connection requests to the mobile computers. To enable this parameter, the value must be a
minimum of 1024. To disable the listen port, the value must be 0.
The default value is 0 (disabled).
Actively Negotiate with Host
If this parameter is enabled, the 9160 G2 starts negotiations with the host during setup of the
telnet connection. Not recommended for most hosts.
270
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
