Wireless Lan Parameters - Psion Teklogix 9150 User Manual

Chapter 4: Base Station Configuration
TekLAN Parameters
4.2.1.2

Wireless LAN Parameters

The Wlan protocol can only be used with spread spectrum radios.
Important:
Base Number
This parameter is used to assign a unique address to each base station. As the termi-
nals move from one base station to another, this address is transmitted by the base
stations to the terminals, identifying each 9150 on a multiple base station system.
The allowable range of base station numbers is 1 to 64.
Timeout
This value is used to adjust Wlan performance and should be set to 10.
Max Priority
This value is used to adjust Wlan performance and should be set to 20.
52
Teklogix 9150 Wireless Gateway User Manual
If your system is using the Wlan protocol, make sure that Operate in
Cellular Mode is enabled (see page 72) in the Radio Link Features
sub-menu and that cellular mode is also set on the 9400/9300
Network Controller.