Table of Contents
Advertisement
Chapter 2: Installation Requirements
Connecting A Video Display Terminal
2.1.5 Connecting A Video Display Terminal
An ANSI compatible video display terminal (e.g., DEC VT220 or higher), or a PC
running terminal emulation, is used for diagnostic purposes.
The terminal is connected to the RS-232 port on the 9160 G2 (see Figure 2.2 on page
21). This port is normally set to operate at 115,200 baud, 8 bits, 1 stop bit, no parity.
To comply with Part 15 of the FCC rules for a Class B computing device, only the
cable supplied (P/N 19387) should be used.
2.2 Changing The Configuration With A Web Browser
The 9160 G2 Flash memory can be reconfigured remotely via the network using a stan-
dard HTML Web Browser such as MS Internet Explorer (version 4.0 or later) or Fire-
fox. See Chapter 4: "Quick Steps For Setup And Launch" for instructions on
changing the parameters and general configuration settings.
23
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
