Table of Contents
Advertisement
C
H A P T E R
3.1 Overview
This chapter describes:
•
Configuring Point-to-Point
•
Configuring Static Route for Routing to Another
Note: The tutorials featured in this chapter require a basic understanding of
connecting to and using the Web Configurator on your P-794H. For details, see
the included Quick Start Guide. For field descriptions of individual screens, see
the related technical reference in this User's Guide.
3.2 Configuring Point-to-Point Connection
In this scenario, a head-quarter company wants to set up a point-to-point
connection with its branch office by using two P-794Hs. The two P-794Hs are
directly connected together through their DSL ports. The P-794H on head-
quarter's side is the server and set as CO mode. The P-794H on branch office's
side is the client and set as CPE mode. The maximum transfer rate for the DSL
connection between CO and CPE is 5696 Kbps and the minimum transfer rate is
1920 Kbps.
The two P-794Hs and the computers behind them can be in the same DHCP domain
but must have different IP addresses. In the example below, the IP address of the CO
is 192.168.1.1 and it provides an IP of 192.168.1.2 to the computer on its LAN. The IP
P-794H User's Guide
Connection, see
page 33
Network, see
3
Tutorials
page 36
33
Advertisement
Table of Contents
