ZyXEL Communications P-793H Quick Start Manual
G.shdsl.bis 4-port security gateway
Hide thumbs
Also See for P-793H:
- User manual (490 pages) ,
- Quick start manual (10 pages) ,
- Specifications (2 pages)
Related Manuals for ZyXEL Communications P-793H
Summary of Contents for ZyXEL Communications P-793H
-
Page 1: Quick Start Guide
P-793H G.SHDSL.bis 4-port Security Gateway Quick Start Guide Version 3.40 Edition 1 6/2006 Copyright © 2006 ZyXEL Communications Corporation. All rights reserved. -
Page 2: Hardware Connections
1 Hardware Connections 1 Use a telephone wire to connect the P-793H’s DSL port to the telephone jack or wall outlet. 2 Use an Ethernet cable to connect a computer to a LAN port for Internet access or to configure the P-793H. -
Page 3: Status Page
• The DSL1 and DSL2 lights blink while the P-793H is looking for the ISP and stay on if the P-793H finds it. • Each LAN light stays on if the corresponding LAN port is properly con- nected and blinks when there is traffic. -
Page 4: Internet Setup
You must have an account for Internet access, and you should have the information provided by your Internet Service Provider (ISP). 1 Open your Internet browser, and enter http://192.168.1.1. If you do not see the screen below, see Troubleshooting. P-793H Quick Start Guide... - Page 5 P-793H Quick Start Guide 2 Enter the password 1234, and click Login. 3 It is recommended to change the default password. Follow the directions in this screen to do so.
- Page 6 P-793H Quick Start Guide 4 Click Go to Wizard setup, and then click Apply. 5 Click Internet Setup. 6 Follow the directions in this wizard to set up your Internet connection.
-
Page 7: Troubleshooting
If you still have problems, see Troubleshooting in the User’s Guide. Viewing Your Product’s Certifications 1 Go to http://www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.