Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 21 System > Prompt
LABEL
Prompt Name
Apply
Cancel
5.6 The Firmware Update Screen
Click System > Firmware Update to open the following screen. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
After a successful upload, the system will reboot.
Do NOT turn off the P-794H while firmware upload is in progress!
Figure 25 System > Firmware Update
The following table describes the labels in this screen.
Table 22 System > Firmware Update
LABEL
Browse...
Update
P-794H User's Guide
DESCRIPTION
Enter a descriptive prompt name.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to find the file you want to upload. If the file is compressed,
remember that you must decompress the files before you can upload
them.
Click this to begin the upload process. This process may take up to two
minutes.
Chapter 5 System Settings
65
Advertisement
Table of Contents
