Table of Contents
Advertisement
Chapter 5 System Settings
After you click the Update button, you can see the progress of the firmware
upload.
Figure 26 Firmware Upload In Progress
When the upload is complete, the screen shows the following message and
requests you to restart the system. Click the Restart button.
Figure 27 Firmware Upload Complete
The P-794H automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 28 Network Temporarily Disconnected
After one or two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, the following screen will appear.
Figure 29 Error Message
66
P-794H User's Guide
Advertisement
Table of Contents
