Table of Contents
Advertisement
the Security State section. You can configure the security level if Security and
Firewall are enabled.
Figure 108 Security State/Level
The following table describes the labels in this screen.
Table 79 Security State/Level
LABEL
Security State
Security
Firewall
Intrusion
Dection
Enabled
Change State
Security Level
Security Level
Change Level
P-794H User's Guide
DESCRIPTION
You must enable Security before enabling Firewall and/or Intrusion
Detection can be enabled. Select Enabled and click Change State.
A security interface must be created before Firewall can be enabled. If
a security interface already exists, select Enabled and click Change
State.
A security interface must be created Intrusion Detection can be
enabled. If a security interface already exists, select Enabled and click
Change State.
Click this to save your state changes.
You can configure your security level if Security and Firewall are
enabled. Select the security level as none, high, medium, or low.
Click Change Level to save your change.
Click this to save your level change.
Chapter 15 Security
181
Advertisement
Table of Contents
