Table 5 Status Screen (continued)
LABEL
Memory
Usage
Interface Status
Interface
Status
Speed
Summary
DHCP Client
List
Packet
Statistics
4.3 DHCP Client List
See
Section 8.3 on page 136
4.4 Packet Statistics
Read-only information here include port status and packet specific statistics of
bridge interfaces. You can clear up the statistics and dynamic entries to start the
screen afresh. Click Status >Interface Statistics/Flushing to access this
screen.
P-794H User's Guide
DESCRIPTION
This field displays what percentage of the P-794H's memory is currently
used. Usually, this percentage should not increase much. If memory
usage does get close to 100%, the P-794H is probably becoming
unstable, and you should restart the device. See
68, or turn off the device (unplug the power) for a few seconds.
This column displays each interface the P-794H has.
This field indicates whether or not the P-794H is using the interface.
For the WAN interface, this field displays Down (line is down) or Up
(line is up or connected).
For the LAN interface, this field displays Connect when the P-794H is
using the interface and Disconnect when the P-794H is not using the
interface.
For the LAN interface, this displays the port speed and duplex setting.
For the WAN interface, it displays the downstream and upstream
transmission rate.
Click this link to view current DHCP client information.
Click this link to view port status and packet specific statistics.
for information on this screen.
Chapter 4 Status Screens
Section 5.8 on page
43