4.1 Overview
This chapter shows you how to use the Device's various features.
•
Setting Up a Secure Wireless
•
Configuring the MAC Address
•
Configuring Static Route for Routing to Another
•
Multiple Public and Private IP Address
•
Firewall Rule to Allow a Specified
•
Port
BindingConfiguration, see
4.2 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the Device serves as an access point (AP), and the notebook is the
wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Device. Then he can set up a wireless
network using WPS
4.2.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
SSID
Security Mode
Pre-Shared Key
802.11 Mode
AMG1302-T10A User's Guide
Network, see
Filter, see
page 38
Mappings, see
Service, see
page 48
(Section 4.2.2 on page
33) or manual configuration
Example
WPA2-PSK with WPA Compatible
DoNotStealMyWirelessNetwork
802.11b+g+n
C
H A PT ER
page 31
Network, see
page 40
page 42
page 46
4
Tutorials
(Section 4.2.3 on page
36).
31