Table of Contents
Advertisement
17.5 Destination Based Unicast Filtering
Click Bridge > Destination Based Unicast Filtering to show the following
screen. You can configure static unicast entries.
Figure 141 Destination Based Unicast Filtering
Each field is described in the table below.
Table 101 Destination Based Unicast Filtering
LABEL
Name
Type
Destination MAC
Address
Egress Ports
Edit Egress Ports
Delete?
OK
Reset
Create new
Unicast Entry
P-794H User's Guide
DESCRIPTION
This show the name of the unicast entry.
This shows the entry type of the unicast entry. If the entry was
created manually, this field shows Dest Static. If it was detected
from the input port, the field shows Dynamic.
This shows the MAC address of the destination.
This shows the egress port(s) of the unicast entry.
Click Edit to delete or add egress port(s). See
214
for more information.
Select the checkbox and click OK to remove the unicast entry.
Click this to confirm and save your settings.
Click this to restore your previously saved settings.
Click this to add a new unicast entry. See
for more information.
Chapter 17 Bridge
Section 17.5.1 on page
Section 17.5.2 on page 215
213
Advertisement
Table of Contents
