Table of Contents
Advertisement
17.5.2 Add Unicast Entry
Click Create new Unicast Entry to show the following screen.
Figure 143 Add Unicast Entry
Each field is described in the table below.
Table 103 Add Unicast Entry
LABEL
Name
Destination MAC
Address
Entry Type
OK
Reset
Cancel
17.6 Multicast Filtering
In contrast with Unicast, Multicast acts like broadcast. It transmits the data to all
end-stations on a LAN or VLAN. Multicast filtering is the system by which end-
stations only receive multicast traffic if they register to join specific multicast
groups. With multicast filtering, network devices only forward multicast traffic to
the ports that are connected to registered end-stations.
P-794H User's Guide
DESCRIPTION
Enter a descriptive name for the unicast entry.
Enter the MAC address of the destination.
This field is not configurable and shows the entry type of the unicast
entry. If the entry was created manually, this field shows Dest Static.
If it was detected from the input port, the field shows Dynamic.
Click this to confirm and save your settings.
Click this to restore your previously saved settings.
Click this to return to the previous screen without saving.
Chapter 17 Bridge
215
Advertisement
Table of Contents
