Routing Table Screen - ZyXEL Communications P-794H User Manual

Table 10 Status > Physical Port: Ethernet (Advanced) (continued)
LABEL
In NUcast Pkts
In Discards
Out Octets
Out Unicast Pkts
Out Errors
Out NUcast Pkts
Out Discards
Phy Mode
Clear Statistic
Phy Loopback
Send Packet To
Source Port
Admin Status
Apply
Reset

4.6 Routing Table Screen

Use the Routing Table screen to view the internal routing table. Click Status >
Routing Table to show the following screen.
If you want to create an IP route, go to the IP Routes > IP route Configuration
screen.
Figure 13 Status > Routing Table
P-794H User's Guide
DESCRIPTION
This field displays the number of NUcast packets received on this port.
This field displays the number of discarded packets received on this
port.
This field displays the number of octets transmitted on this port.
This field displays the number of unicast packets transmitted on this
port.
This field displays the number of errored packets transmitted on this
port.
This field displays the number of NUcast packets transmitted on this
port.
This field displays the number of discarded packets transmitted on this
port.
Select the PHY mode for this port. Choose Auto for auto negotiation
mode. Other options include 10-HalfDuplex, 10-FullDuplex, 100-
HalfDuplex, and 100-FullDuplex.
Select true if you want to reset the counters for the selected port. If
not, select false.
Select true if you want to enable PHY loopback. If not, select false.
Select true if you want to send send packet to the source port. If not,
select false.
If you want to enable this port, select up. If you want to disable it,
select down.
Click Apply to save your changes.
Click Reset to restore your previously saved settings.
Chapter 4 Status Screens
51