Table of Contents
Advertisement
Chapter 7 WAN Setup
Table 54 PPPoA Routed: Edit PPP (continued)
LABEL
Auto Connect
Idle Timeout
Summary
Summary Err
Uptime
Idletime
Version
SVC
If In Ouctets
If Out Ouctets
If In Errors
If Out Errors
Packets Sent
Good Packets
Channel Snmp If
Index
Version
Enabled
Change
Reset
114
DESCRIPTION
Select true if you want to establish a connection when starting up and
to automatically re-establish it when disconnected by the ISP. If not,
select false.
Enter the period of time for idling (no activity) before the system auto-
disconnects the connection. Enter "0" if you do not want the system to
time out.
This shows a brief summary of the connection.
This shows a brief summary of the connection errors.
This shows how long the current connection has been up.
This shows how long the current connection has been idling.
This shows the version of the
Select true if you want to enable Switched Virtual Circuit (SVC). If
not, select false.
This shows the number of If octets received on this service.
This shows the number of If octets transmitted on this service.
This shows the number of errored If packets received on this service.
This shows the number of errored If packets transmitted on this
service.
This shows the number of transmitted packets on this service.
This shows the number of good packets received on this service
This shows the Channel SMNP If Index of this service.
This shows the version of the Channel SMNP If Index.
Select true to enable this WAN service. If not, select false.
Click this to save your changes.
Click this to restore your previously saved settings.
P-794H User's Guide
Advertisement
Table of Contents
