Table of Contents
Advertisement
Chapter 7 WAN Setup
The following table describes the fields in this screen.
Table 51 RFC 1483 Routed/MER: Edit NAT
LABEL
NAT Enabled
Change
Reset
7.5.2 Edit a RFC 1483 Bridged WAN Connection
Click Edit next to an existing RFC 1483 Bridged WAN connection. Then click on the
tabs on top of the screen to configure detailed settings of the connection.
Figure 69 RFC 1483 Bridged: Edit
7.5.2.1 Edit Service
Click the Edit Service tab to edit the creator name and description of the service.
Refer to
screen.
7.5.2.2 Edit RFC 1483
Click the Edit RFC1483 tab to edit the RFC 1483 settings of the service. Refer to
Section 7.5.1.2 on page 102
7.5.2.3 Edit ATM Channel
Click the Edit Atm Channel tab to edit the ATM channel settings of the service.
Refer to
screen.
108
DESCRIPTION
Select true if you want to enable the NAT function. If not, select false.
Click this to save your changes.
Click this to restore your previously saved settings.
Section 7.5.1.1 on page 101
for detailed descriptions of the fields in this screen.
Section 7.5.1.3 on page 103
for detailed descriptions of the fields in this
for detailed descriptions of the fields in this
P-794H User's Guide
Advertisement
Table of Contents
