Table of Contents
Advertisement
Chapter 14 Quality of Service (QoS)
Enter the value for the weight and click on the drop down list to choose the
desired ALD profile.
Click OK to save your settings. Click Reset to restore your previously saved
settings.
Note: The ALD profile dropdown list will only appear if their corresponding queue has
been assigned the weight. Also, the minimum value for the default queue is 1.
You cannot configure the default queue as 0.
Figure 106 Edit Fair Weight Scheduler Profile
14.6 Transport Classifier & Scheduler
Configuration
In the Transport Classifier & Scheduler Configuration screen, you can attach
an existing classifier and/or meter profile to an existing transport. Click QoS >
Transport to show the following screen.
Use the drop-down list corresponded to the transport and choose which classifier
to want to attach and click OK to save the configuration. To attach an existing
scheduler profile/meter profile to an existing transport, use the drop-down list
corresponded to the transport and choose which scheduler to add. Click OK to
save the configuration.
172
P-794H User's Guide
Advertisement
Table of Contents
