Table of Contents
Advertisement
Chapter 6 LAN Setup
The following table describes the fields in this screen.
Table 29 Virtual Interface: Add
LABEL
IP Address
Mask
Apply
6.5 Create an Ethernet Bridged LAN Connection
Click the Create a new service button in the LAN Connections screen to show
the following. Select Ethernet bridged and click the Configure button.
Note: If all LAN ports have services already configured, you need to remove a service
to create a new one.
Figure 42 Configuration > LAN Connections: Create: Ethernet Bridged
The following table describes the fields in this screen.
Table 30 Configuration > LAN Connections: Create: Ethernet Bridged
LABEL
Ethernet
Configure
78
DESCRIPTION
Enter the LAN IP address for this virtual interface.
Enter the subnet mask for this virtual interface in dot decimal
notation. The subnet mask indicates what part of the IP address is the
same for all computers in the network.
Click this to save your changes.
DESCRIPTION
Select Ethernet bridged as the LAN connection service.
Click this to confirm your setting and go to the next setup screen.
P-794H User's Guide
Advertisement
Table of Contents
