Overview This Quick Start Guide shows how to set up the P-793H for Internet access. See the User’s Guide for information about setting up point-to-point or point-to-2points connections. 1 Hardware Connections 1 Use the provided Y-connector with the included telephone cables to connect the P- 793H’s DSL port to the telephone jacks or wall outlets for a point-to-2point connection.
Page 3
Look at the LEDs • The POWER LED blinks green while your P-793H starts up and stays on when it is ready. • The DSL1 and DSL2 LEDs blink while the P-793H is trying to establish a connection with the ISP and stay on when the connection is established.
You must have an account for Internet access, and you should have the information provided by your Internet Service Provider (ISP). 1 Open your Internet browser, and enter 192.168.1.1. 2 Enter the administrator password 1234, and click Login. P-793H Quick Start Guide http://...
Page 5
Follow the directions in this screen to do so. 4 Click Go to Wizard setup, and then click Apply. 5 Click Internet Setup. 6 Follow the directions in this wizard to set up your Internet connection. P-793H Quick Start Guide...
Page 6
Procedure to View a Product’s Certification(s) 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.
Need help?
Do you have a question about the P-793H and is the answer not in the manual?
Questions and answers