Table of Contents
Advertisement
Chapter 8 DHCP Server
8.2 Enable DHCP Server
The DHCP server feature allows the P-794H to dynamically assign IP addresses to
DHCP clients on the LAN. If the DHCP server is disabled, you need to manually
assign a static IP address to computers on your network. See
233
for more information on configuring a static IP on your computer.
Click Configuration > DHCP Server in the navigation panel. The DHCP Server
screen displays. Click the Enable button to activate the DHCP server on the P-
794H.
Note: DHCP server and DHCP relay cannot be enabled at the same time.
Figure 84 Configuration > DHCP Server: Enable
8.3 DHCP Server Interfaces
You can assign the DHCP server to operate on one or more specific interfaces. The
DHCP server operates on all available IP interfaces by default. However, if you
want to enable DHCP server and DHCP relay at the same time, you can assign the
DHCP server to operate on one specific interface. Then DHCP relay can run on a
different interface.
136
Appendix B on page
P-794H User's Guide
Advertisement
Table of Contents
