Table of Contents
Advertisement
Chapter 7 WAN Setup
7.5.1.2 Edit RFC 1483
Click the Edit RFC1483 tab to edit the RFC 1483 settings of the service.
Figure 63 RFC 1483 Routed/MER: Edit RFC 1483
The following table describes the fields in this screen.
Table 46 RFC 1483 Routed/MER: Edit RFC 1483
LABEL
Mode
MAC
Snmp If Index
If In Octects
If Out Octects
If In Errors
If Out Errors
Packets Sent
Good Packets
Channel Smnp If
Index
Version
Enabled
Change
Reset
102
DESCRIPTION
If you want to change the encapsulation mode for this service select
from: LlcBridged, VcMuxBridged, LlcRouted, and VcMuxRouted.
The default encapsulation mode is LlcRouted.
Enter the MAC address of this service.
Enter the SNMP If Index in this field.
This shows the number of If octets received on this service.
This shows the number of If octets transmitted on this service.
This shows the number of errored If packets received on this service.
This shows the number of errored If packets transmitted on this
service.
This shows the number of transmitted packets on this service.
This shows the number of good packets received on this service
This shows the Channel SMNP If Index of this service.
This shows the version of the Channel SMNP If Index.
Select true to enable this WAN service. If not, select false.
Click this to save your changes.
Click this to restore your previously saved settings.
P-794H User's Guide
Advertisement
Table of Contents
