Table of Contents
Advertisement
7.5.3.4 Edit ATM Channel
Click the Edit Atm Channel tab to edit the ATM channel settings of the service.
Refer to
Section 7.5.1.3 on page 103
screen.
7.5.3.5 Edit IP Interface
Click the Edit IP Interface tab to edit the IP interface settings of the service.
Refer to
Section 7.5.1.4 on page 104
screen.
7.5.3.6 Edit TCP MSS Clamp
Click the Edit Tcp Mss Clamp tab to edit the TCP MSS Clamp settings of the
service. Refer to
in this screen.
7.5.3.7 Edit RIP Versions
Click the Edit Rip Versions tab to edit the RIP settings of the service. Refer to
Section 7.5.1.6 on page 106
7.5.3.8 Edit NAT
Click the Edit NAT tab to edit the NAT settings of the service. Refer to
7.5.1.7 on page 107
7.5.4 Edit a PPPoA Bridged WAN Connection
Click Edit next to an existing PPPoA Bridged WAN connection. Then click on the
tabs on top of the screen to configure detailed settings of the connection.
Figure 75 PPPoA Bridged: Edit
7.5.4.1 Edit Service
Click the Edit Service tab to edit the creator name and description of the service.
Refer to
Section 7.5.1.1 on page 101
screen.
7.5.4.2 Edit PPP
Click the Edit PPP tab to edit the PPP settings of the service. Refer to
7.5.3.2 on page 112
P-794H User's Guide
for detailed descriptions of the fields in this
for detailed descriptions of the fields in this
Section 7.5.1.5 on page 105
for detailed descriptions of the fields in this screen.
for detailed descriptions of the fields in this screen.
for detailed descriptions of the fields in this
for detailed descriptions of the fields in this screen.
Chapter 7 WAN Setup
for detailed descriptions of the fields
Section
Section
117
Advertisement
Table of Contents
