Table of Contents
Advertisement
Table 8 Status >Physical Port: SHDSL (Basic) (continued)
LABEL
Annex
Line Probe
Cap List Style
PBO
PBOValue
HWVersion
IDCVersion
P-794H User's Guide
DESCRIPTION
This shows the annex mode: ANNEX_A uses DSL over POTS;
ANNEX_B uses DSL over ISDN.
This shows whether line probe is enabled or disabled. The P-794H
uses line probes to determine the best possible transmission rate.
This shows the cap list style used.
This shows the PBO mode. The PBO mode sets the power backoff
setting on the specified SHDSL port(s). Power backoff calculates how
much power is needed for the connection.
This shows the power backoff value measured in decibel (dB).
This shows the hardware version.
This shows the IDC version.
Chapter 4 Status Screens
47
Advertisement
Table of Contents
