Table of Contents
Advertisement
4.1 Overview
This chapter provides tutorials for setting up your EMG2881-T20A.
•
Set Up a Wireless Network Using WPS
•
Connect to the EMG2881-T20A's WiFi Network Manually (No WPS)
•
Using Multiple SSIDs on the EMG2881-T20A
4.2 Set Up a Wireless Network Using WPS
This section gives you an example of how to set up a wireless network using WPS. This example uses the
EMG2881-T20A as the AP and a WPS-enabled Android 4.4.2 smartphone as the wireless client.
There are two WPS methods for creating a secure connection via the web configurator or utility. This
tutorial shows you how to do both.
• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See
Section 4.2.1 on page
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the EMG2881-T20A's interface. See
secure method, since one device can authenticate the other.
4.2.1 Push Button Configuration (PBC)
Make sure that your EMG2881-T20A is turned on and that the device is placed within range of your
1
Android 4.42 smartphone.
WPS is enabled by default on the EMG2881-T20A. If not, log into EMG2881-T20A's Web Configurator and
2
turn it on in the Configuration > Wireless > WPS screen. You can either press the WPS button on the
EMG2881-T20A's panel or press the Push Button button in the Configuration > Wireless > WPS screen
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS Push Button or the
3
WPS icon (
Note: It doesn't matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The EMG2881-T20A sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the EMG2881-T20A securely.
24. This is the easier method.
).
EMG2881-T20A User's Guide
C
Section 4.2.2 on page
24
H A P T E R
Tutorials
25. This is the more
4
Advertisement
Table of Contents
