C
H A P T E R
16.1 Overview
The P-794H usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-794H send data to devices
not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-794H's
LAN interface. The P-794H routes most traffic from A to the Internet through the
P-794H's default gateway (R1). You create one static route to connect to services
offered by your ISP behind router R2. You create another static route to
communicate with a separate network behind a router R3 connected to the LAN.
Figure 127 Example of Static Routing Topology
A
R3
16.2 The IP Route Configuration Screen
Use this screen to view the static route rules. Click IP Routes > IP route
configuration to open the following screen. If an IP route is already configured,
P-794H User's Guide
LAN
WAN
16
IP Routes
R1
R2
199