Table of Contents
Advertisement
Chapter 17 Bridge
17.2 Bridge Interfaces
Click Bridge > Interface Configuration to show the following screen.
Figure 131 Bridge Interfaces
Each field is described in the table below.
Table 96 Bridge Interfaces
LABEL
Name
PVID
Frame Access
Type
Ingress Filtering
User Priority
Transport
Priority Map
Delete?
Action
17.2.1 Priority Map
Click Priority Map for a specific bridge interface in the Bridge Interfaces screen
to show the following.
206
DESCRIPTION
This shows the bridge interface name.
This is the Port VLAN ID (PVID) associated with the interface.
If this field is set to ALL, each bridge interface can accept all frames.
If it is set to TAGGED, each bridge interface only accepts tagged
frames.
If this field is set to true, the interface accepts VLAN tagged frames
only if the VLAN ID in the frame has this interface in its egress
interface list.
This field regenerates user-priority mapping for a bridge interface.
This shows the name of attached transport.
Click this to configure the mapping of user priority in the incoming
frames to the regenerated user priority that will be used for traffic
class mapping, as well as being set in the VLAN tag of the outgoing
frame. See for more information.
Select the checkbox and click OK to remove the interface.
Click OK to confirm and save your settings. Click Reset to restore
your previously saved settings.
P-794H User's Guide
Advertisement
Table of Contents
