Table of Contents
Advertisement
Chapter 3 Tutorials
Click IP routes > IP route Configuration. Click Create new IP V4Route.
1
Configure the Create IP V4Route screen using the following settings:
2
• Type 192.168.10.0 as the Destination.
• Type 192.168.1.253 (R's N1 address) in the Gateway field.
• Type 255.255.255.0 as the Netmask for the destination, N2.
• Select iplan as your Interface.
Click Apply. The route you just added shows on the Existing Routes list.
Now B should be able to receive traffic from A. You may need to additionally
configure B's firewall settings to allow specific traffic to pass through.
38
P-794H User's Guide
Advertisement
Table of Contents
