User Priority To Regenerated Priority Map - ZyXEL Communications P-794H User Manual

Specifiy the number of traffic classes supported by the bridge interface in the
Number of Traffic Classes section. The value can be from 1 to 8. Click OK to
save your setting.
Figure 132 Number of Traffic Classes

17.2.2 User Priority to Regenerated Priority Map

Use the User Priority to Regenerated Priority Map section to specify the
mapping of user priority in the incoming frames to the regenerated user priority
that will be used for Traffic Class mapping, as well as being set in the VLAN tag of
the outgoing frame.
Figure 133 User Priority to Regenerated Priority Map
P-794H User's Guide
Chapter 17 Bridge
207