ZyXEL Communications P-794H User Manual page 193

PROTOCOL
TCP
ICMP
TCP
TCP
UDP
15.2.4.4 Security Logging Configuration
Click Security Logging Configuration to show the following screen. You can
configure your security logging settings.
Figure 122 Security Logging Configuration
The following table describes the labels in this screen.
Table 89 Security Logging Configuration
LABEL
Security Logging State
Disable
Security
Logging
Security Event Logging States
Logging Type
Status
P-794H User's Guide
ATTACK NAME
IMAP SYN/FIN Scan ((Port scan attack)
SMURF (if victim protection is set; SMURF
Attack)
SYN Flood (if scanning threshold is
exceeded; SYN/FIN/RST Flood )
Net Bus Scan (Port scan attack)
Back Orifice Scan (Port scan attack)
DESCRIPTION
This shows the condition of security logging. Click Disable Security
Logging if you want to disable it. Click Enable Security Logging if
you want to ensable it.
This show the type of logging.
This shows the status of the logging.
Chapter 15 Security
193