Set Up The Cpe - ZyXEL Communications P-794H User Manual

Click Apply to save your settings.
5

3.2.2 Set Up the CPE

Log in to the client P-794H of branch office that you want to configure as the CPE.
1
Click SHDSL > SHDSL Configuration and select CPE in the Unit ID field.
2
The other settings in this screen must be same as your configurations in the CO.
3
Select EFM_4-pair as the Wire Mode.
Enter 19200 bps in the MinLineRate field and 5696000 in the MaxLineRate
4
field.
P-794H User's Guide
Chapter 3 Tutorials
35