Table of Contents
Advertisement
send traffic from computer A (in N1 network) to computer B (in N2 network), the
traffic is sent to the P-794H's WAN default gateway by default. In this case, B will
never receive the traffic.
N1
You need to specify a static routing rule on the P-794H to specify R as the router
in charge of forwarding traffic to N2. In this case, the P-794H routes traffic from A
to R and then R routes the traffic to B.This tutorial uses the following example IP
settings:
N1
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
The P-794H's WAN
The P-794H's LAN
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
P-794H User's Guide
A
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
Chapter 3 Tutorials
R
N2
B
R
N2
B
37
Advertisement
Table of Contents
