Table of Contents
Advertisement
Chapter 4 Status Screens
rate. Go to the SHDSL > SHDSL Configuration screen for other SHDSL
configurations.
Figure 9 Status > Physical Ports: SHDSL (Basic)
The following table describes the fields in this screen.
Table 8 Status >Physical Port: SHDSL (Basic)
LABEL
View advanced
attributes
Unit Id
Wire Mode
Pam Mode
PMMS
EXT_64_TRADITI
ONAL_ADAPTIVE
_ALGORITHM
Min Line Rate
Max Line Rate
PSD
46
DESCRIPTION
Click this to view the complete configuration and traffic statistics of
the SHDSL port.
This shows whether the P-794H is set in CO (Central Office) or CPE
(Customer Premise Equipment) mode.
This field shows the wire pair mode of the P-794H.
This field shows whether this port has a physical connection.
This field shows whether PMMS is in use. The PMMS (Power
Measurement Modulation Session) mode specifies how the target
noise margin value is acquired.
This field shows whether
EXT_64_TRADITIONAL_ADAPTIVE_ALGORITHM is in use.
You can set the minimum transfer line rate.
You can set the maximum transfer line rate.
This shows whether the PSD is symmetric or asymmetric.
P-794H User's Guide
Advertisement
Table of Contents
