Table of Contents
Advertisement
14.5.1 Edit a Priority Queuing Scheduler Profile
If the scheduler profile is Strictly Priority Queuing, scheduler for transporting is
based on the priority. Therefore, packets with the highest priority will get to send
first and only when the highest priority packets have all been sent will the second
priority packets being sent.
To edit the priority of a scheduler profile, click Edit next to the priority profile to
display the following screen. You can assign the priority of the packets as well as
the ALD profile to determine their degree of conditions. Click on the drop down list
to choose the desired ALD profile. Refer to
information on ALD.
Click OK to save your settings. Click Reset to restore your previously saved
settings.
Figure 105 Edit Priority Scheduler Profile
14.5.2 Edit a Fair Weight Queuing Scheduler Profile
If the scheduler profile is Fair Weight Queuing (WFQ), scheduler for transporting is
based on the weight of percentage. Each queue will contain the percentage weight
and these weights will identify the total percentage that will get to send on every
transmission.
To edit a WFQ profile, click Edit next to the WFQ profile to display the following
screen. You can assign weight percentage to each queue as well as the ALD profile
to determine their degree of conditions.
P-794H User's Guide
Chapter 14 Quality of Service (QoS)
Section 14.4 on page 168
for more
171
Advertisement
Table of Contents
