Table of Contents
Advertisement
Table 110 Firmware (continued)
QoS
Security
Management
Table 111 Firmware Features
FEATURE
Firmware Upgrade
Configuration Backup &
Restoration
Network Address
Translation (NAT)
P-794H User's Guide
QoS for routed/bridged traffic
VBR-rt, VBR-nrt, CBR and UBR
Shaping at Ethernet level
RFC2475, RFC2474
Classifier, Meter, Scheduler device
Up to 512 NAT translation sessions
ALGs supporting
Embedded Firewall
Intrusion Detection
IP packet filtering
VLAN ingress filtering
SSH
Password protection
PAP and CHAP support
CID & Web-based Configuration
Command-line interface
Remote access management via Telnet
Management VLAN
SNMP v1, v2c/MIB II support
SNTP client
UPnP
SSH
DESCRIPTION
Support Remote Code download and upgrade over Ethernet
interface.
Note: Only upload firmware for your specific model!
Make a copy of the P-794H's configuration. You can put it back
on the P-794H later if you decide to revert back to an earlier
configuration.
Each computer on your network must have its own unique IP
address. Use NAT to convert your public IP address(es) to
multiple private IP addresses for the computers on your
network.
Appendix A Product Specifications
229
Advertisement
Table of Contents
