Table of Contents
Advertisement
Chapter 6 LAN Setup
The following table describes the fields in this screen.
Table 24 Configuration > LAN connections
LABEL
Service Name
IP/Bridge
Interface Name
Description
Creator
Create a new
service
Change LAN port
IP address
6.2.1 Delete a LAN Connection
Click on the name of the LAN connection you want to remove under the
Description column of the LAN Connections screen. The following screen is
shown. Click Delete this connection to remove.
Note: You cannot delete a connection that is currently in use.
Figure 36 LAN Connections: Delete
The following table describes the fields in this screen.
Table 25 LAN Connections: Delete
LABEL
Description
Creator
Port
74
DESCRIPTION
This shows the name of the LAN connection.
This shows the name of the IP/bridge interface that the connection is
using.
You can remove a LAN connection by clicking on its name in this
column. See
Section 6.2.1 on page 74
This shows the method of how the services are created. By default
command, all ports are created from CLI. If the service is created by
the Web Configurator, this field will show WebAdmin.
Click this if you want to create a new LAN connection. See
on page 75
for more information.
Click this if you want to change the LAN port's IP address. See
6.6 on page 79
for more information.
DESCRIPTION
You can remove a LAN connection by clicking on its name in this
column. See for more information.
This shows the method of how the services are created. By default
command, all ports are created from CLI. If the service is created by
the Web Configurator, this field will show WebAdmin.
This shows the LAN port that the connection is using.
for more information.
Section 6.3
Section
P-794H User's Guide
Advertisement
Table of Contents
