P-793H v2 Overview The P-793H v2 is a secure G.SHDSL.bis bonded broadband gateway. The P-793H v2 provides high-speed Internet access or high-speed point- to-point connections with other ZyXEL devices of the same type. The P- 793H v2 itself can act as a router or as a bridge.
Page 4
1. DSL: Use the provided Y-connector with the included telephone cables to connect the P-793H v2’s DSL port to the telephone jacks or wall outlets for a point-to-2point connection. For a standard connection to your ISP or a point-to-point connection, you can unplug one of the telephone cables from the Y-connector and use it for your DSL connection.
P-793H v2 Status Page 1. In your browser, go to http://192.168.1.1. 2. Enter the default password user to go directly to the Status screen. 3. See the User’s Guide for field descriptions of the Status screen.
793H v2 to finish detection. If any other screens appear, follow the directions in the screen. If the web page opens correctly, your P-793H v2 is ready for you to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
Page 7
P-793H v2 4. When you login the for first time, it is recommended that you change the default password. Follow the directions in this screen to do so. 5. Click Go to Wizard setup. Then, click Apply.
6. Click INTERNET SETUP. Wait while your P-793H v2 tries to detect your DSL connection. 7. Follow the directions in the wizard. Do not change default settings if your ISP did not provide information. Troubleshooting 1. If you cannot access the web configurator using Internet Explorer in...
Page 9
Check the lights on the front panel. If they are different from what is described in Hardware Connections , make sure the P-793H v2 is correctly connected. If the lights are still different, turn off the device, wait a few seconds, and turn it on again.