Table of Contents
Advertisement
Chapter 19 Troubleshooting
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Turn the P-794H off and on.
4
If the problem continues, contact the vendor.
5
19.2 P-794H Access and Login
I forgot the IP address for the P-794H.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address
2
of the P-794H by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the P-794H (it depends on the network), so enter this IP address in
your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
Section 1.6 on page
I forgot the password.
The default admin password is 1234, and the default user password is admin.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 1.6 on page
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
224
24.
24.
P-794H User's Guide
Advertisement
Table of Contents
