Table of Contents
Advertisement
Chapter 15 Security
Table 88 Security Trigger Configuration (continued)
LABEL
Address
Translation
Type
Delete
New Trigger
15.2.4.3 Intrusion Detection Configuration
Intrusion Detection Settings (IDS) are network protection features that can be
configured to guard against certain Denial of Service and port scanning. Any
attempts to attack or scan the network will cause the traffic originating from the
attacking machine to be blacklisted for a set time.
Click Intrusion Detection Configuration to show the following screen. You can
enable the blacklist by selecting true in the Use Blacklist field. Configure the
settings for the blacklist and click Apply.
Figure 121 Intrusion Detection Configuration
Enabling the Blacklist will block traffics from an external host when it has detected
one of the following types of attack:
PROTOCOL
UDP
UDP
TCP
TCP
192
DESCRIPTION
Specify what type of address replacement is to be set on a trigger. You
must allow Binary Address Replacement to enable this function.
Click this to remove the trigger.
Click this to create a new trigger.
ATTACK NAME
Attack Name
Ascend Kill
WinNuke (Port scan attack)
Xmas Tree Scan (Port scan attack)
P-794H User's Guide
Advertisement
Table of Contents
