Create An Ethernet Routed Lan Connection - ZyXEL Communications P-794H User Manual

Table 25 LAN Connections: Delete
LABEL
Type
Delete this
connection

6.3 Create an Ethernet Routed LAN Connection

You can configure the P-794H as a multi-port router. To configure this, you must
delete the default services since all ports have already been created under bridged
mode. See
connection.
Click the Create a new service button in the LAN Connections screen to show
the following. Select Ethernet routed and click the Configure button.
Note: If all LAN ports have services already configured, you need to remove a service
to create a new one.
Figure 37 LAN Connections: Create: Ethernet Routed
The following table describes the fields in this screen.
Table 26 LAN Connections: Create: Ethernet Routed
LABEL
Ethernet
Configure
P-794H User's Guide
DESCRIPTION
This shows the type of connection you are using: Ethernet routed or
Ethernet bridged.
Click this if you want to remove this connection.
Section 6.2.1 on page 74
DESCRIPTION
Select Ethernet routed as the LAN connection service.
Click this to confirm your setting and go to the next setup screen.
for information on how to delete a
Chapter 6 LAN Setup
75