ZyXEL Communications P-794H User Manual page 77

You can also create a virtual interface by clicking Change LAN port IP address
in the LAN Configurations screen, then click Create a new virtual interface.
Figure 39 Ethernet Routed Setup Finished
Click Create a new virtual interface to go to the next configuration screen. You
can edit or remove an existing virtual interface service in this screen.
Figure 40 Virtual Interface
The following table describes the fields in this screen.
Table 28 Virtual Interface
LABEL
IP Interface
Name
Edit
Delete
Edit the IP address and subnet mask of the virtual interface in the following
screen. Click Apply to finish.
Figure 41 Virtual Interface: Add
P-794H User's Guide
DESCRIPTION
This shows the name for the virtual interface.
Click this to edit the virtual interface.
Click this to remove the virtual interface.
Chapter 6 LAN Setup
77