Table of Contents
Advertisement
Chapter 7 WAN Setup
Table 47 RFC 1483 Routed/MER: Edit ATM Channel (continued)
LABEL
Sustainable Cell
Rate
Packet Priority
Levels
ATM Traffic Class
Port
Port Class
Change
Reset
7.5.1.4 Edit IP Interface
Click the Edit IP Interface tab to edit the IP interface settings of the service.
Figure 65 RFC 1483 Routed/MER: Edit IP Interface
104
DESCRIPTION
The Sustainable Cell Rate sets the average cell rate (long-term) that
can be transmitted. Type the Sustainable Cell Rate, which must be less
than the Peak Cell Rate. Sustainable Cell Rate applies with the variable
bit rate traffic classes. You can type a number of (ATM) cells per
second in the first field or type a number of kilobytes per second in the
second field to have the system automatically compute the number of
ATM cells per second.
Specify the level of packet priority for this service.
Select the type of ATM traffic class: UBR, CBR, VBR-rt, VBR, ABR,
UBR+,or QFC.
Enter the name of the port associated with this service.
This shows the type of the port.
Click this to save your changes.
Click this to restore your previously saved settings.
P-794H User's Guide
Advertisement
Table of Contents
