Table of Contents
Advertisement
Chapter 16 IP Routes
you can edit or delete it in the Existing Routes list. If there is no IP route, click
Create new IP V4Route.
Figure 128 IP Route Configuration
The following table describes the labels in this screen.
Table 91 IP Route Configuration
LABEL
Existing Routes
Valid
Destination
Gateway
Netmask
Advertise
Delete?
Advanced
Options
Apply
Reset
Create new IP
V4Route
200
DESCRIPTION
This field indicates whether the rule is valid or not.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
This parameter specifies the IP network subnet mask of the final
destination.
Select true if you want the route to be advertised via RIP. If not, select
false.
Select the checkbox and click Apply to remove a route.
Click this to configure advanced options of a this route.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to create a new IP route.
P-794H User's Guide
Advertisement
Table of Contents
